Isns settings – Quantum TC2201 User Manual
Page 37
Chapter 2 TC2201 Web Interface
System Page
Quantum TC2201 User’s Guide
17
• Select
Save
to save the CHAP authentication changes. These
changes will become activated after the next time the TC2201
reboots.
iSCSI Portal Group Settings
2
The iSCSI portal group settings can be toggled between the following two
options:
•
Use one portal group for both ports
: By default, the TC2201 is set to
use one Portal Group for both ports, which enables failover capability
between the two iSCSI ports.
•
Use separate portal groups for each port
: This option disables failover
capability between the two iSCSI ports, so that each port can be
mapped separately.
iSCSI Portal Group Map Settings
2
•
iSCSI Portal Group Map Settings
allows selection of the default map(s)
to the current iSCSI portal group(s). Map selections include Auto
Assigned and Indexed.
• Once all changes are made, select the
Submit
button to send the
changes to the TC2201. Changes will become activated after the
next time the TC2201 reboots.
iSNS Settings
2
This page allows for configuration the iSNS settings for the TC2201.
To access the
iSNS Settings
page:
1
Click
iSNS Settings
in the
System
menu.
The
iSNS Settings
page displays (see
):