Quantum TC2201 - Manual (Page 56)

Chapter 2 TC2201 Web Interface
iSCSI Mapping Page
Quantum TC2201 User’s Guide 36
Figure 26 Select Host Page
The current host information is shown at the top of the page. This
information can be changed in the
Modify iSCSI Host
section.
• New or updated information can be typed into the field boxes for
Host Name, iSCSI Name, and Map Name.
• The Map Name can be selected from the drop-down list.
• To make the changes permanent, select the
Submit
button.
The following shows the select current map page when the Select Current
Map
Edit/View
button is selected (see figure 27 ).
Note: Host settings are saved to memory when the
Submit
button is
selected but are not activated until either the
Activate Mapping
Changes
button is selected or the TC2201 is rebooted.