Quantum TC2201 - Manual (Page 107)

Perform Configuration
Quantum TC2201 User’s Guide 87
SCSI Target Overrides Menu 3
This option allows for setting the SCSI Target Overrides. Prior to this
menu, a prompt appears to choose the particular Target ID (0 through 15)
to edit. Select the appropriate Target ID and then the SCSI Override
Configuration Menu will appear.
Table 20 SCSI Target
Overrides Menu
Following are descriptions for each of the settings:
•
Wide Negotiation
enables/disables the option for negotiation on a
wide SCSI bus.
Note:
Normally, override settings should not be changed except
when directed to do so by an authorized Quantum technician.
SCSI Parameter Override Configuration Menu
X.XX.XXXX XXXXXX XXXXXXXXXXXXXX
07/26/2005 08:56:22
Bus 0, Target 0 Current Configuration:
Wide Negotiation Enabled
Synchronous Negotiation Enabled
Alternate Block Size Override Disabled
Ultra SCSI 3 Negotiation Enabled
1) Toggle Wide Negotiation
2) Toggle Synchronous Negotiation
3) Toggle Alternate Block Size Override
4) Toggle Ultra SCSI 3 Negotiation
X) Return to previous menu