Quantum TC2201 - Manual (Page 142)

Download a New Revision of the Firmware
Quantum TC2201 User’s Guide 122
6 Press the Send button.
7 The firmware will begin to download to the TC2201.
When the download process is complete, the system verifies that the
firmware image was successfully written to the FLASH memory and then
reboots the TC2201. Upon reboot, the TC2201 detects that there is a
newly downloaded firmware image and copies that image to the boot
sector of the FLASH and then boots with that image. At that point the
TC2201 is using the new firmware.
The following figure shows what you might see on your terminal when
you download a new revision of the firmware:
Table 57 Download
Firmware Menu
Download Firmware Menu
X.XX.XXXX XXXXXX XXXXXXXXXXXXXX
07/26/2005 08:56:22
This will replace the current revision of the firmware.
A reboot will also be performed as part of this process.
Are you sure (y/n)? y
Please begin xmodem file transfer...
§§§§§§§§
D O W N L O A D C O M P L E T E
***********************************
...* Start System Cold Reboot!!