Event log, Figure 37 – Quantum TC2201 User Manual
Page 69
Chapter 2 TC2201 Web Interface
Utilities Page
Quantum TC2201 User’s Guide
49
Figure 37 Event Log Settings
Page
To make any changes, modify the entries as described below and then
select the
Submit
button.
Select from the Event Log settings shown. Each option enables/disables
its respective filtering option. Event logging captures over 2000 events
and then starts overwriting the log when full. The default setting is All
Events Logged.
Event Log
2
The
Event Log
page displays the event log.
To access the
Event Log
page:
1
Click
Event Log
from the
Utilities
menu.
The
Event Log
page displays (see
Note:
So that event logging is accurate, be sure to correctly set the
clock and date in the
Real Time Clock
configuration menu.