Quantum TC2201 - Manual (Page 44)

Chapter 2 TC2201 Web Interface
Ethernet Page
Quantum TC2201 User’s Guide 24
Ethernet Port 2 The Ethernet Port page allows you to configure the Ethernet ports on the
TC2201.
To access the
Ethernet Port
page:
1
Click
Ethernet Port
from the
Ethernet
menu.
The
Ethernet Port
page displays (see figure 17 ):
Figure 17 Ethernet Port Page
Both the Ethernet management port and the two iSCSI ports can be
configured for appropriate Ethernet network settings.
•
IP address
is the IP address of the TC2201. The default setting for the
Ethernet port is 1.1.1.1. The default setting for iSCSI Port 0 is
169.254.1.1. The default setting for iSCSI Port 1 is 169.254.1.2.
•
Subnet Mask
is the IP subnet mask for the TC2201. The default setting
is 255.255.255.0.
•
IP Gateway
is the IP address of the gateway for the Ethernet network
connected to the TC2201. The default setting is 0.0.0.0.
•
DNS Server IP Address
is the IP address for the DNS server and
should be similar in form to XXX.XXX.XXX.XXX where each XXX
represents an integer in the range of 1 to 255.