Real time clock configuration, Figure 14 – Quantum TC2201 User Manual
Page 40
Chapter 2 TC2201 Web Interface
System Page
Quantum TC2201 User’s Guide
20
Real Time Clock
Configuration
2
This
Real-Time Clock
configuration page allows you to set up of the date
and time for the TC2201.
To access the
Real-Time Clock
page:
1
Click
Real-Time Clock
in the
System
menu.
The
Real-Time Clock
page displays (see
):
Figure 14 Real-Time Clock Page
Note:
In the event that either or both the user name and password
are forgotten, it is possible to reset the user name and
password to their default values by resetting the TC2201 to
factory defaults from the Command Line Interface using the
serial port (see
on page 71). Note that resetting to
factory defaults from the serial port will also reset all other
configuration settings to factory defaults, as well as erase all
current maps. It is recommended to capture a copy of the
system report (available from the System Utilities Menu) in
order to make reconfiguration easier.