Quantum TC2201 - Manual (Page 36)

Chapter 2 TC2201 Web Interface
System Page
Quantum TC2201 User’s Guide 16
Figure 11 iSCSI Settings Page
2
To make any changes, modify the entries as described below and
then select the Submit button.
iSCSI Target Settings 2
•
Authentication
can be toggled between Enabled and Disabled. The
default setting is Disabled. When set to Enabled, CHAP
authentication for iSCSI is enabled.
•
Setup Authentication
button opens the iSCSI Authentication page.
This page consists of entry fields for CHAP name, Initiator Secret,
and Target Secret, as well as a field for Target CHAP Name.
• CHAP Names are 1 to 255 characters in length and Initiator/
Target Secrets are 12 to 16 characters in length. Target CHAP
Name is 1-18 characters.
• Select
Delete All
to remove all CHAP Authentication User
Settings. Delete All does not remove the Target CHAP name.
• For each existing entry, select
Edit
to make changes or
Delete
to
remove specific entries.
• Select
Add
in make a new entry.