Quantum TC2201 User Manual
Page 55
Chapter 2 TC2201 Web Interface
iSCSI Mapping Page
Quantum TC2201 User’s Guide
35
• Select the
Activate Mapping Changes
button to dynamically update
the current map without rebooting the TC2201. These changes are
made effective immediately after being submitted.
Caution:
Before activating any port mapping changes, it is strongly
recommended that the user verify there are not any
command or data operations occurring in conjunction
with devices affected by the mapping changes. For
example, deleting a LUN or device from a map may
disrupt I/O transfers with that device. It is the user’s
responsibility to ensure that no operations will be
negatively impacted due to the activation of mapping
changes.
The following shows the select host page when the Select Host
Edit/View
button is selected (see
Note:
All current Mapping Settings will take effect immediately! If
another management interface has made unsaved mapping
changes, those changes will be lost.
Note:
If the
Activate Mapping Changes
button is not selected, the
mapping changes will not take effect unless the TC2201 is
rebooted.