Quantum TC2201 - Manual (Page 133)

System Utilities
Quantum TC2201 User’s Guide 113
Reset and Save
Configuration to
Factory Defaults
3
This option resets all current configuration options to the factory defaults
and saves those options to FLASH memory as the current configuration.
The changes take effect after the TC2201 has rebooted.
Caution:
Resetting to factory defaults from the serial port will affect
ethernet connectivity. User configured values for the IP
address, gateway, and subnet mask, and as well the user
name and password are not retained after the TC2201
resets. The handles resets differently, as described in the
note below.
System Utilities
3
Table 47 Sysem
Utility Menu
Note:
Resetting to factory defaults from the Telnet interface will not
affect ethernet connectivity. User configured values for the IP
address, gateway, and subnet maskare retained after the
TC2201 resets. Note that user names and passwords are NOT
retained.
Note:
Settings are not reset to factory defaults until the TC2201 is
rebooted.
System Utility Menu
X.XX.XXXX XXXXXX XXXXXXXXXXXXXX
07/26/2005 08:56:22
1) System Statistics Menu
2) Event Log
3) View Report
4) SCSI Command Tracking
X) Return to main menu