Procedure c: veritas backup exec, Figure 49, Veritas backup exec – Quantum TC2201 User Manual
Page 151
Procedure C: Veritas Backup Exec
Quantum TC2201 User’s Guide
131
Procedure C: Veritas Backup Exec
1
1
Within Backup Exec application (as shown in
), click on the
Devices tab.
2
Right click on one of the tape drives detected and select
Properties
.
3
When the Drive Properties box appears, select the Configuration
tab.
4
Specify the Block Size to be tested. The default is 64k.
Figure 49 Veritas Backup Exec