Figure 47, Clear all entries from current map, Table 31 – Quantum TC2201 User Manual

Page 117: Deleting multiple luns

Perform Configuration

Quantum TC2201 User’s Guide

Table 31 Deleting
Multiple LUNs

• Select 3 from the ‘Map Edit Menu’ to clear (i.e. remove all entries

from) the current map. The user is prompted for confirmation.

Figure 47 Clear all
Entries from Current
Map

• Select 4 from the ‘Map Edit Menu’ to fill the current map. This

selection scans the device list and appends all unmapped devices at

the end of the ‘current’ map. Devices marked as ‘DOWN’ will not be

mapped. After this operation completes, the Edit Map Entries screen

will appear.

Select Idx to delete (X=Cancel, D=DeleteMultiple) > d

Enter comma delimited Idxs to delete > 1

Are you sure you want to delete Idx 1? (Y=Confirm, X=Cancel) > y

Note:

When deleting multiple LUNs, the user can list the LUNs to delete in
a comma or space delimited format.

This will clear all entries from iSCSI map 'Newer Map'

for Portal Group: Both Ports.

Are you sure (Y=Confirm, X=Cancel) > y

iSCSI map 'Newer Map' for Portal Group: Both Ports was cleared.