Figure 21 – Quantum TC2201 User Manual
Page 49
Chapter 2 TC2201 Web Interface
SCSI Bus Page
Quantum TC2201 User’s Guide
29
Figure 21 SCSI Overrides
Settings Page
To finalize any changes for the override settings, select the
Submit
button.
•
Alternate Initiator ID
can be assigned an Initiator ID, which is the ID
for a second SCSI device that can request operations from other SCSI
devices, or targets. This ID should be a unique ID on the bus. The
default setting is NONE.
SCSI Bus Target Overrides
2
Selecting a SCSI Target ID (0 through 15) opens the SCSI target overrides
page (see
Note:
Override settings should not be changed except by or under
the direction of an authorized Quantum technician
.