HP 310X - Manual (Page 96)

Settings, Telnet Config
parameter ).
HP Web Jetadmin password
Configured on the print server using HP Web Jetadmin
and an HP-proprietary
SNMP MIB (Management
Information Base) object. For instructions, refer to your
online help for HP Web Jetadmin.
❍
●
Examples of Access Control Settings
Settings Level of Access
Control
Embedded web
server ,
SNMP v1/v2c, or
Telnet enabled ●
Administrative
password not set ●
SNMP Set
Community
Name not
specified ●
Host access list
empty ●
None.
Any system can access
the print server
configuration parameters
through the embedded
web server,
SNMP v1/v2c, or
Telnet. No passwords
are required.
Best used for a trusted
environment.
Password(s) set:
IP administrative
password,
HP Web Jetadmin
password,
SNMP Set
Community
Name ●
No encryption ●
Host access list
empty ●
Low.
Any system can access
the print server
configuration parameters
through the embedded
web server,
SNMP v1/v2c, or
Telnet, but password(s)
protect against
unintentional
configuration changes.
Best used for a trusted
environment.