HP 310X - Manual (Page 101)

Note: You may need your Windows System distribution files or
CD-ROMs to install TCP/IP components.
Check whether you have Microsoft TCP/IP Printing protocol
and TCP/IP printing support. Click
Start
,
Settings
,
Control Panel
. Double-click
Network
. In the resulting
Network
dialog box, check under the
Protocols
tab for
TCP/IP Protocol
and under the
Services
tab for
Microsoft TCP/IP Printing
.
If both are listed, the necessary software is already installed.
(Skip to “
B. Configuring the networked printer ”).
If not, continue to the next step.
1.
To install the software, click the
[Add]
button for each tab and
install the
TCP/IP Protocol
and the
Microsoft TCP/IP Printing
service. Follow the instructions on the screen. When prompted,
type the full path to the Windows NT distribution files (you
may need your Windows NT workstation or server CD-ROM).
2.
You may be automatically prompted for the TCP/IP
configuration values. If not, select the
Protocols
tab in the
Networks
window and select
TCP/IP Protocol
. Then click
[Properties]
.
If you are configuring a Windows server, type the
IP address, default gateway address, and subnet mask in
the appropriate spaces. ❍
If you are configuring a client, check with your network
administrator to learn whether you should enable
automatic TCP/IP configuration or whether you should
type a static IP address, default gateway address, and
subnet mask in the appropriate spaces. ❍
3.
Click [OK] to exit. 4.
If prompted, exit Windows and restart your computer for the
changes to take effect. 5.
B. Configuring the networked printer
Set up the default printer by performing the following steps.
Click
Start
,
Settings
,
Printer
. The
Printers
window opens. 1.
Double-click Add Printer . 2.
Select
My Computer
, then click
[Next]
. 3.