HP 310X - Manual (Page 103)

Windows 2000 LPD setup procedure
Along with these general instructions, see your system documentation
for information on configuring these systems.
The process consists of these parts:
Installing TCP/IP software if not already installed A.
Configuring the networked printer with the queue and port B.
A. Installing TCP/IP software
This procedure lets you check whether you have TCP/IP installed on
your Windows 2000 system, and to install the software if necessary.
Note: You may need your Windows System distribution files or
CD-ROMs to install TCP/IP components.
Check whether you have Microsoft TCP/IP Printing protocol
and TCP/IP printing support. Click
Start , Settings ,
Control Panel . Double-click the Network and Dial-up
Connections
folder. Select the
Local Area Connection
for your
network, then click the
File
menu and select
[Properties]
.
If Internet Protocol (TCP/IP) is listed and enabled in the list of
components used by this connection, the necessary software is
already installed. (Skip to “
B. Configuring the networked
printer ”).
If not, continue to the next step.
1.
To install the software, in the
Local Area Connection Properties
window, click
Install
. In
the
Select Network Component Type
window, select
Protocol
and click
[Add]
to add the
Internet Protocol (TCP/IP)
.
Follow the instructions on the screen.
2.
Enter TCP/IP configuration values for the computer: On the
General
tab in the
Local Area Connection Properties
window,
select
Internet Protocol (TCP/IP)
and click
[Properties]
.
If you are configuring a Windows server, type the
IP address, default gateway address, and subnet mask in
the appropriate spaces. ❍
If you are configuring a client, check with your network
administrator to learn whether you should enable
automatic TCP/IP configuration or whether you should
type a static IP address, default gateway address, and ❍
3.