HP 310X - Manual (Page 68)

Using the embedded web server
for HP Jetdirect 175x external print server/Internet connector for USB
and HP Jetdirect 310x external print server/Internet connector for USB
HP Jetdirect print servers contain an embedded web server that can be accessed from
a compatible web browser over an intranet. You can use any computer on the
network to access the configuration and management pages for the print server and
the attached network device—the printer or multifunction (MFP or All-in-One)
device. The print server's embedded web server allows you to monitor server and
device status, view and change print server configuration, and use basic scanning
over the network if you have a multifunction (MFP or All-in-One) device.
Compatible versions of web browsers (and HP Web Jetadmin) ●
Getting started with the embedded web server ●
Directory of pages and features in the embedded web server ●
Viewing the embedded web server
Before you can use the embedded web server, the HP Jetdirect print server must be
configured with an IP address.
The print server may already be configured for IP as part of the software
installation; check for its IP address on the
configuration page . If it is
not configured, see ways to configure an IP address: overview of IP and
IP addressing.
After an IP address is established on the print server, perform the following steps.
Run a supported web browser. 1.
Enter the IP address of the print server as the URL address.
For example: http://192.168.45.39
2.
The Home page will be displayed, as illustrated below.