HP 310X - Manual (Page 49)

may
require a specific format for your system.
For example:
In Windows NT 4.0 or Windows
2000:
arp -s 192.168.45.39
00-01-E6-a2-31-98
ping 192.168.45.39
●
In UNIX:
arp-s 192.168.45.39
00:01:E6:a2:31:98
ping 192.168.45.39
●
Note:
Once the IP address has been set on the print server,
additional arp and ping commands will be ignored. Once
the IP address is configured, arp and ping cannot be used
unless the print server is reset to factory values (see
cold
reset ).
On UNIX systems, the arp -s command may vary
between different systems.
Some BSD-based systems expect the IP address (or host
name) in reverse order. Other systems may require
additional parameters. See your system documentation
for specific command formats.
©2000, 2001 Hewlett-Packard Company