Support info, Usb settings – HP 310X User Manual

Page 78

Set

Community

Name

An SNMP Set Community Name is a password allowing access to
configure (or “write”) SNMP control functions on the print server.
An incoming SNMP SetRequest must contain a community name
that matches the one stored on the print server before the print server
will respond. The community name must be ASCII characters and
can be up to 32 characters long. The default community name is
“public”.

Get

Community

Name

An SNMP Get Community Name is a password that allows “read”
access to SNMP information on the print server. The community
name must be ASCII characters and can be up to 32 characters long.
The default community name is “public”.

Select Language [not on 175x]

Clicking

Select Language

allows you to select another supported language in which

the web pages will appear. Supported languages may also be selected through
language preference settings in your browser (see your browser’s Help).

Support Info

Click on the

Networking

tab at the top of the web page. (Make sure that beneath

Configuration

in the left column of the page,

Support Info

is selected.)

Use this page to configure links for Support assistance. You can designate a Support
person and phone number of an administrator for this device, as well as URL
addresses for web-based product and technical support. To assign a parameter
setting, enter the desired value and click

[Apply]

USB Settings