HP 310X - Manual (Page 37)

Other parameters ●
Support parameters ●
Tables of TFTP parameters:
General parameters for TFTP
TFTP Parameter Description
passwd:
The IP administrative password (up to 16 case-sensitive alphanumeric characters) that allows
administrators to control changes of print server configuration parameters through Telnet or
embedded web server.
sys-location:
Identifies the physical location of the printer (SNMP sysLocation object). Only printable
ASCII characters are allowed. The maximum length is 64 characters. The default location is
undefined. (Example:
1st floor, south wall)
sys-contact:
ASCII character string (up to 64 characters) that identifies the person who administers or
services the printer (SNMP
sysContact object). This may include how to contact this
person. The default contact is undefined.
TCP/IP main parameters for TFTP
TFTP Parameter Description
host-name:
Specifies the node name that will appear on the Jetdirect configuration page. Default is
NPIxxxxxx , where xxxxxx is the last six digits of the print server’s hardware address
(MAC or LAN address).
domain-name:
The domain name for the device (for example, support.hp.com ). It does not include the
host name—it is not the Fully Qualified Domain Name (such as
printer1.support.hp.com ).
dns-svr: IP address of the DNS (Domain Name System) server.
pri-wins-svr: The IP address of the primary Windows Internet Name Service (WINS) server.
sec-winds-svr: The IP address of the secondary Windows Internet Name Service (WINS) server.
smpt-svr:
The IP address of the outgoing e-mail Simple Mail Transport Protocol (SMTP) server, for
use with supported scanning devices.
TCP/IP print option parameters for TFTP
TFTP Parameter Description
9100-printing:
Enables or disables printing to TCP port 9100 on the print server.
0 Disables.
1 (default) Enables.
ftp-printing:
Enables or disables the ability to print via FTP:
0 Disables.
1 (default) Enables.
ipp-printing:
Enables or disables the ability to print via IPP:
0 Disables.
1 (default) Enables.
lpd-printing:
Enables or disables LPD (Line Printer Daemon) printing services on the print server:
0 Disables.
1 (default) Enables.
banner:
A port-specific parameter that specifies printing an LPD banner page:
0 Disables banner pages.
1 (default) Enables banner pages.
interlock:
Specifies whether an acknowledgement (ACK) on all TCP packets is required before the
printer is allowed to close a Port 9100 print connection.