HP 310X - Manual (Page 64)

SNMP trap destination list must have a trap daemon to listen to those traps.
IPX/SPX parameters for Telnet
Telnet Parameter Description and Values
ipx-config
Enables or disables IPX/SPX protocol operation on the print server:
0 Disables.
1 (default) Eenables.
ipx-unitname
A user-assigned alphanumeric name assigned to the print server (31 characters maximum). By
default, the name will be
NPIxxxxxx , where xxxxxx are the last six digits of the hardware
address (MAC or LAN address).
Address
(read-only parameter) Identifies the IPX network and node numbers detected on the network, in
the form
NNNNNNN:hhhhhhhh (hexadecimal), where NNNNNNNN is the network number and
hhhhhhhh is the hardware address (MAC or LAN address) of the print server.
ipx-frametype
Specifies the IPX frame type setting, one of the following: AUTO (default), EN_SNAP,
EN_8022, EN_8023, EN_II, TR_8022, TR_SNAP.
ipx-sapinterval
Specifies the time interval (1–3600 seconds) that the print server waits between Service
Advertising Protocol (SAP) broadcasts on the network. The default is
60 seconds. 0 disables
SAP broadcasts.
ipx-nds-tree
An alphanumeric string, up to 31 characters, that specifies the name of the Novell Directory
Services (NDS) tree for this print server.
ipx-nds-context
An alphanumeric string, up to 256 characters, that specifies the NDS context for the print
server.
ipx-job-poll
Specifies the time interval (1–255 seconds) that the print server will wait to check for print jobs
in a print queue. The default is
2 seconds.
ipx-banner
Enables or disables printing an IPX banner page using the Printer Job Language (PJL):
0 Disables.
1 (default) Enables.
ipx-eoj
Enables or disables IPX end-of-job notification using PJL:
0 Disables.
1 (default) Enables.