HP 310X - Manual (Page 8)

Tools for changing configuration and for
managing
Software tools summary : describes a variety of software tools that you
can use to install, configure, and manage a network printer. These tools
cover a variety of functions in a variety of operating environments. In
general, they allow you to set parameters for the various
protocols listed
below ...
Embedded web server : describes the web server contained within the
print server. You can use this tool to configure and manage the print
server.
HP Web Jetadmin: used to install, configure, and/or monitor the
networked printer, this software is available at
http://www.hp.com/support/net_printing.
Security for configuration : describes the security offered by the various
ways of configuring and managing the print server.
Protocols
The following protocols, and protocol-specific configurations and tools,
are supported by the print server.
TCP/IP : includes an overview of TCP/IP, as well as information
on these methods of applying TCP/IP parameters to the print server:
DHCP: a tool for autoconfiguration ❍
BOOTP: a tool for autoconfiguration ❍
TFTP: a tool for extended autoconfiguration ❍
RARP: a tool on some systems for configuring an IP address ❍
Telnet: a tool for configuration and monitoring the print
server ❍
embedded web server: a tool for configuration and
management ❍
ports for IP access reference summary ❍
moving the print server to another IP network: notes ❍
●
LPD (line printer daemon) printing: can be set up using these LPD
instructions
●
FTP printing: [for 310x only, not for 175x] can be set up using ●