Network statistics, Tcp/ip protocol information – HP 310X User Manual

Page 118

Network Statistics

Provides the current values for various network parameters monitored by the print server.

Message

Description

Total
Packets
Received

Total number of frames (packets) received by the print server without error.
This includes broadcast, multicast packets, and packets specifically
addressed to the print server. This number does not include packets
specifically addressed to other nodes.

Unicast
Packets
Received

Number of frames specifically addressed to this print server. This does not
include broadcasts or multicasts.

Bad Packets
Received

Total number of frames (packets) received with errors by the print server.

Framing
Errors
Received

Maximum of CRC (Cyclic Redundancy Check) errors and framing errors.
CRC errors are frames received with CRC errors. Framing errors are frames
received with alignment errors. A large number of framing errors could
indicate a cabling problem with your network.

Total
Packets
Transmitted

Total number of frames (packets) transmitted without error.

Unsendable
Packets

Total number of frames (packets) not successfully transmitted because of
errors.

Transmit
Collisions

Number of frames not transmitted because of repeated collisions.

Transmit
Late
Collisions

Total number of frames not transmitted because a late collision occurred. A
large number may indicate a cabling problem on the network.

TCP/IP Protocol Information

Provides the current status and parameter values for the TCP/IP network protocols.

Message

Description

Status

Current TCP status:

Ready

the print server is awaiting data over TCP/IP.

●

Disabled

TCP/IP was manually disabled.

●

Initializing

the print server is searching for the BOOTP server,

or trying to get the configuration file through TFTP. An additional
status message may also be displayed.