HP 310X - Manual (Page 15)

TCP/IP ●
HP Jetdirect 310x print server ●
Supported Proxies (HP software)
Web proxy with support for HTTP v1.1 or greater (may not be
needed if printing over an intranet) ●
Microsoft-Supplied Software
Note: Contact Microsoft Corp. for support of Windows IPP software
Windows 2000 Integrated Software
On Windows 2000 systems, an alternative to using the HP-supplied
software is to use the IPP-client software integrated with Windows
2000. The IPP implementation on the HP Jetdirect print server is
compatible with Windows 2000 IPP-client software.
To set up a print path to an HP Jetdirect-connected Internet printer
using the Windows 2000 IPP-client software, proceed as follows:
Open the Printers folder (click Start, select Settings, and select
Printers). 1.
Run the Add Printer wizard (double-click Add Printer), then
click Next. 2.
Select Network Printer and click Next. 3.
Select Connect to a printer on the Internet and enter the print
server’s URL:
http://IP_address[/ipp/port# ]
where:
IP_address is the IP address configured on the
HP Jetdirect print server
Example:
http://192.160.45.40
An IPP connection to the print server with IP
address 192.160.45.40.
Then click Next.
4.
You will be prompted for a printer driver (the HP Jetdirect print 5.