HP 310X User Manual
Page 117
SSL/TLS
For 310x only.
(Secure Sockets Layer, Transport Layer Security)
Specifies whether IP communication with the print server’s embedded web
server is encrypted and secured with an X.509 certificate. A string of the format
CN:common-name
specifies the common name (CN) of the digital certificate
installed.
Disabled
a digital certificate has not been installed.
●
Cert
Expires
For 310x only, specifies the expiration date of the digital certificate for SSL/TLS
encrypted security, if it is enabled (see
format, for example:
2002-10-02 12:45 UTC
Not Applicable
SSL/TLS is not enabled, or not supported (on the
175x), so this entry is inapplicable.
●
SNMP
Versions
Specifies the SNMP versions enabled on the print server.
Disabled
All SNMP versions are disabled on the print server. No
SNMP access is allowed.
●
1,2
SNMP v.1 and SNMP v.2c are supported, and SNMP v.3 is
disabled, or not supported (on the 175x).
●
1,2,3-na/np
SNMP v.1, v.2c, and v.3 are enabled. v.3 is enabled
with the minimum security of no authentication (“na”) and no privacy
(“np”) enabled. (Only for 310x.)
●
1,2,3-a/np
SNMP v.1, v.2c, and v.3 are enabled. v.3 is enabled
with the minimum security of authentication enabled (“a”) but no privacy
(“np”) enabled. (Only for 310x.)
●
1,2,3-a/p
SNMP v.1, v.2c, and v.3 are enabled. v.3 is enabled
with the minimum security of authentication (“a”) with privacy (“p”)
enabled. (Only for 310x.)
●
3-na/np
SNMP v.1 and v.2c are disabled. SNMP v.3 is enabled
with the minimum security of no authentication (“na”) and no privacy
(“np”) enabled. (Only for 310x.)
●
3-a/np
SNMP v.1 and v.2c are disabled. SNMP v.3 is enabled
with the minimum security of authentication enabled (“a”) but no privacy
(“np”) enabled. (Only for 310x.)
●
3-a/p
SNMP v.1 and v.2c are disabled. SNMP v.3 is enabled with
the minimum security of authentication (“a”) with privacy (“p”) enabled.
(Only for 310x.)
●
SNMP Set
Cmty
Name
Specifies whether an SNMP set community name has been configured on the
print server. An SNMP set community name is a password for “write” access to
SNMP control functions (SNMP SetRequests) on the print server.
Not Specified
an SNMP set community name has not been set.
●
Specified
a specific SNMP set community name has been set.
●
Access
List
Identifies whether a host access control list is configured on the print server. A
host access control list specifies the IP address of individual systems, or IP
network of systems, that are allowed access to the print server and device.
Not Specified
a host access list is not configured on the print
server. All systems are allowed access.
●
Specified
a host access list is configured on the print server.
●