Usb port information, Security settings – HP 310X User Manual
Page 116
USB Printer 1
Heads the section for the USB printer class descriptor information
supplied by the manufacturer of the printing device. The number
1
indicates that the configuration and diagnostic pages will be printed on
the printing device attached to print server port 1. See
USB Port Information
Provides the USB printer class descriptors for the device connected to the port.
Message
Description
Device Name
Name of the attached USB printing device, supplied by the manufacturer.
Manufacturer
Manufacturer of the attached printing device.
Serial Number
Serial number of the attached printing device.
Communication
Mode
Current USB communication mode:
1284.4
IEEE standard protocol, a mode for printers and
multi-function (All-in-One) devices that allows multiple channels
of simultaneous print, scan, and status communication.
●
MLC
HP-proprietary protocol for Multiple Logical Channels, a
mode for printers and multi-function (All-in-One) devices that
allows multiple channels of simultaneous print, scan, and status
communication.
●
Bidirectional
two-way printer communication, sending
print data to the printing device and returning status information
from the printing device.
●
Unidirectional
one-way printer communication from
computer to printing device.
●
Device not found
connection of a printing device has not
been detected. Check device and cable.
●
Device not supported
the device connected is not a
printer (for example, a camera).
●
Security Settings
Provides the current values for various security and access control parameters for the print server.
Message
Description
Admin
Password
Specifies whether an IP administrative password has been configured on the
print server. It is used by the the embedded web server and Telnet interfaces to
control access to print server configuration parameters. Up to 16 case-sensitive,
alphanumeric characters can be used.
Not Set
an IP administrative password has not been set.
●
Set
a specific IP administrative password has been set.
●