HP FAX-700 - Manual (Page 94)

Operation and Usage 3Ć22
To change a one-touch number. If you need to change a one-touch number or station name, press the buttons in the
sequence shown.
Menu
→
2 7
→ →
Set
→
→ →
Stop
1
→
Photo
Scroll up
Scroll down
Scroll to access the
first number to be
cleared or press the
one–touch number to
be cleared
Clear
Set
→
→
To change additional numbers
or stations now, return to the
scrolling step in this procedure
and repeat to here for each num-
ber or station to be changed
→
To clear
Either clear the entry
or position the cur-
sor to reenter in-
formation
Contrast
Resolution
To posi-
tion
cursor
over digits
to be re-
placed
→
Enter
new num-
ber
or station
name
→
→
One-Touch Dialing on the HP FAX-950
With one-touch dialing, you can set up a one-touch button to represent a telephone number. Each one-touch number
can contain a maximum of 36 digits, including pauses and spaces, and a station name up to 15 characters in length to
identify the receiving station. Pressing the Pause button causes a hyphen to appear in your display where entering the
phone number.
Use the 24-button, one-touch keypad to select the pre-programmed phone number(s).
One-Touch Key Programming. If you have not already programmed the one-touch keypad, or wish to change a pro-
grammed phone number, you will need to enter your phone number(s) and station name into the fax machine memory
as follows:
Press a One-Touch
Key (01 – 24)
Enter
Phone
Number
Enter Station Name
(Character Codes)*
Menu
→
2 7
→ →
Set
→
1
→ → → →
→
→
Set
→
Stop
Set
→ →
→
To program additional one-touch
keys now, repeat from (press a
one-touch key) to here. Repeat
again until you have entered all
the one-touch numbers desired
*Refer to next paragraph
for procedure to enter
the station name.