HP FAX-700 - Manual (Page 49)

2Ć24 Installation and Configuration
6. Grasping the replacement paper separator so that the spring-loaded separator plate spring is held against the
body of the separator, insert the paper separator into its slot until it snaps into place. See Figure 2-33.
Figure 2Ć33. Installing the Replacement Paper Separator
FAX950–20
PressurePlate
Handset Installation (HP FAX-750 and FAX-950 Only)
Handset Installation (HP FAX-750)
To install the handset in the HP FAX-750, perform the following procedure:
1. Place the fax machine on the bench with the right side down and the bottom of the machine facing you.
2. Attach the handset base to the fax machine by engaging the handset base tabs into the slots in the bottom left
side of the fax. See Figure 2-34, DETAIL A.
3. Place the handset onto its handset base and plug the end of the handset cord with the small connector into the
back of handset. See Figure 2-34, DETAIL B.