HP FAX-700 - Manual (Page 168)

Optimization 4Ć34
Table 4-2. HP FAX-900 Parameter Options
2ĆDigit
Parameter
Number
Parameter Name
Options (choices)
* factory set Description
01 CONTRAST
1: Normal *
2: Darken
3: Lighten
Specifies contrast of scanned documents.
Use if original has contrast of normal quality.
Use if original is unusually light.
Use if original is unusually dark.
02 RESOLUTION
1: Standard *
2: Fine
Specifies resolution of scanned documents.
Use for typical text documents.
Use for detailed documents and
illustrations.
03 PHOTO
1: Fast
2: Quality *
Specifies print speed and density.
To print fast, use less ink.
To print at highest quality.
05 MEMORY
1: Off *
2: On
Specifies setting of the home (start)
position of memory.
Setting not enabled.
Setting enabled.
06 DIALING METHOD
1: Pulse
2: Tone *
Specifies dialing method.
To dial using pulse signals.
To dial using tone signals.
07 HEADER PRINT
1: Inside *
2: Outside
3: No Print
Specifies location of headers and footers.
Header and footer printed inside image area.
Header and footer printed outside image area.
Header and footer not printed.
08 HEADER FORMAT
1: Logo ID No.*
2: From To
Specifies header content of outgoing documents.
Your logo and ID appear in header.
Your logo and receiving station name in header.
09 RCV'D TIME PRINT
1: Invalid *
2: Valid
Specifies printing of receive time on documents.
No receive information printed.
Received Time, Sender's ID & page numbers printed.
10 KEY/BUZZER VOLUME
1: Off
2: Soft *
3. Loud
Specifies beep volume (loudness) of fax machine.
Beep not audible.
Low (soft) volume.
High (loud) volume.
12 COMM. JOURNAL
1: Off
2: Always
3: Inc. only *
Specifies printing of communication journal.
Journal not printed.
Journal is printed after every fax transmission.
Journal is printed only when
communication fails.
13 AUTO JRNL PRINT
1: Invalid
2: Valid *
Specifies communication journal printing.
Does not print journal every 32 transactions.
Automatically printed every 32 transactions.
15 ATTENDED MODE
1: Tel *
2: Fax/Tel Sw.
Specifies attended reception mode.
Normally for voice calls, requires user action to receive a fax call.
Normally for fax calls, requires user action to receive voice calls.
(Not available in France or Germany.)