HP FAX-700 - Manual (Page 107)

Operation and Usage 3Ć35
the fax machine and press the Start button or dial the reception code, normally 123, from an extension phone for the fax
machine to receive fax calls. Incoming voice calls are treated as normal voice telephone calls. In the Auto Fax/Phone
mode, the fax machine answers calls as fax calls. The user can pick up the phone and disable fax reception by press the
Start button.
To set the Answer Manually reception mode from any other reception mode, press the buttons in the sequence
shown.
Menu
→
6
→
Stop
1
→
Enter
→
7
→
Enter
→
→
Remote Reception (setting 9) is normally enabled and the reception code, 123, is entered at the factory. If you don’t
want a remote phone to be able to initiate fax reception when your fax machine is set to answer manually disable
Remote Reception.
To disable Remote Reception, press the buttons in the sequence shown.
Menu
→
6
→
Stop
Enter
→
9
→
Enter
→
→ →
Enter
→
If you have disabled Remote Reception and wish to enable it, or you wish to create a reception code other than 123, you
may do so by following the next procedure.
To enable Remote Reception and/or enter a new reception code, press the buttons in the sequence shown and enter
the information as indicated.
Menu
→
6
→
Stop
Enter
→
9
→
Enter
→
→ →
Enter
→
Type new
Reception
Code
→
Enter
→
→
To set Auto Fax/Phone reception mode from any other reception mode, press the buttons in the sequence shown.
Menu
→
6
→
Stop
3
→
Enter
→
7
→
Enter
→
→