HP FAX-700 - Manual (Page 213)

Problem Resolution 5Ć38
Table 5-7. HP FAX-900 and FAX-950 Function Parameters (Continued)
No. Parameter Selections Function
08 MONITOR
(Off) 1 = Off
2 = On Selects Monitor ON/OFF for monitor-
ing fax signals
09 DC LOOP
(Off) 1 = Off (normal)
2 = On (off-hook) Can select a false, off-hook state for
a back-to-back communication test
10 TX LEVEL
(–9 dBm) 00 = 0 dBm
.
.
15 = –15 dBM Selects the signal output level from 0
to –15 dBm in 1 dBm steps
11 RX LEVEL
(–43 dBm) 1 = –43 dBm
2 = –38 dBm
3 = –33 dBm
4 = –48 dBm Selects receiving sensitivity of –43,
–38, –33, or –48 dBm
12 DTMF LEVEL
(–6 dBm) 00 = 0 dBm
.
.
15 = –15 dBm Selects DTMF(touch tone) output lev-
el from 0 to –15 dBm in 1 dBm steps
13 G3 RX EQL
(7.2 km) 1 = 0 km
2 = 6 km
3 = 7.2 km
4 = 13.2 km Selects cable equalizer in G3 recep-
tion mode
14-16 Not Used
17 TX START
(9600 bps) 1 = 2400 bps
2 = 4800 bps
3 = 7200 bps
4 = 9600 bps Selects transmission modem start
speed
37 PROTOCOL
DISPLAY
(Off) 1 = Off (not displayed)
2 = On (displayed) Selects whether or not the machine
displays modem speed during com-
munication
38 Not Used
39 Not Used in U.S.
40 Not Used
41 PAUSE TIME
(3 sec) 1 = 1 sec
.
.
10 = 10 sec Selects pause time from 1 to 10 se-
conds in one-second steps
42 PHONE CALL (For
Hong Kong version
only) 1 = Ignore (detect primary
ringer)
2 = Answer (detect secondary
ringer) Selects whether or not to detect the
primary ringer of a double ringer
43 REDIAL INTERVAL
(3 min) 0 = no waiting
.
.
15 = 15 minutes Selects redial interval from 0 to 15
minutes in one-minute steps
44 REDIAL COUNT
(5) 0 = no redial
.
.
15 = 15 times Selects redial count of 0 to 15 times
in one-step intervals