HP FAX-700 - Manual (Page 154)

Optimization 4Ć20
To Set up for Relayed Transmission on the HP FAX-950
The first step in preparing to use the relayed transmission feature is to set fax parameter 41 to option 2 (valid).
To set up for relayed transmission, press the buttons in the sequence shown.
Menu
→
Set
→
→
7
→
Set
→
Set
→
Stop
4
→
4
→
1
→
2
→
To Set up your own Telephone Number, Network Address and
Network Password on the HP FAX-950
The second step in preparing to use the relayed transmission feature is to set up your own fax machine network
identification parameters.
To set up your network identification parameters, press the buttons in the sequence shown and enter the necessary
information where requested.
Menu
→
Set
→
→
7
→
Set
→
Set
→
Stop
5
→ Enter your
phone number →
Enter 4-digit
network address
→
Enter 4-digit
network password
Set
→ →
→
To Set up a One-touch Or Speed-dial Number and Network
Address on the HP FAX-950
The third step in preparing to use the relayed transmission feature is to set up the one-touch or speed -dial mode and
enter the relay station’s identification parameters.
To set up the dial mode and relay station parameters, press the buttons in the sequence shown and enter the
necessary information where requested.
Menu
→
Set
→
→
7
→
Set
→
Stop
→
Enter 4-digit
network address
→
Enter 2-digit
relay address
Set
→ →
→
2
→
1
→
Press desired one-touch key
or press speed-dial key and
enter speed-dial code
Enter station name
Set
→ →
Set
→ → 1. Station recorded is relay station
2. Station recorded is not relay station →
→
1. For transmission through relay station
2. For direct transmission
→