HP FAX-700 - Manual (Page 20)

Product Information 1Ć15
Table 1-6. Paper Specifications
Paper Size U.S. letter (8 1/2 in x 11 in)
U.S. legal (8 1/2 in x 14 in)
A4 (210 mm x 297 mm)
Effective Printing Width See Figure 1Ć5 and Figure 1Ć6
Paper Type Cut sheet
Cut Edge Conditions Sharp blade cut, with no visible
fray
Finishing Dimensions "0.0313 inch of nominal,
corners 90_ " 0.20_
Paper Grain Long grain
Moisture Content 4% to 6% by weight
Opacity 84% minimum
Packaging Polylaminated moistureĆproof
ream wrap
Paper weight 60 to 90 g/m 2 ( 16 lb to 24 lb)
Wax Pick 2 inch minimum (Dennison)
When loading paper into the fax, observe the following precautions:
D Handle all paper by the edges only
D Load all paper types the same way
D Use only one paper type in the printer’s paper tray at a time
D Always load paper print side up in the media tray
Plain paper has a print side which is not visible to the naked eye, so before removing paper from its package for use in
the printer, check the outside package label. The print side will be indicated by an arrow or other symbol on the label.
Avoid the following types of media:
D Paper greater than 90 g/m 2 (24 lb) or less than 60 g/m 2 (16 lb)
D Paper with cutouts or perforations
D Multiple part forms
D Paper sizes other than those listed in this document