HP FAX-700 - Manual (Page 155)

Optimization 4Ć21
To Send a Document Using Relayed Transmission on the HP FAX-950
Note
All the necessary parameters for your network must be set prior to sending. Instructions
for setting up the fax machine for relayed transmission are presented in the preceding paragraphs
in this section.
To use relayed transmission, press the buttons in the sequence shown.
Menu
→
2
→ Enter desired one-touch or
speed-dial number →
Start
When using relayed transmission the document is stored in memory, then sent to the relay station. After the relay
station sends the document to the receiving station(s), your fax machine will print a Relay XMT Result Report sent
back by the relay station.