HP FAX-700 User Manual
Page 169
Optimization 4Ć35
Table 4-2. HP FAX-900 Parameter Options (Continued)
2ĆDigit
Parameter
Number
Parameter Name
Options (choices)
* factory set
Description
16
UNATTENDED MODE
1: Fax *
2: Tam I/F
Specifies unattended reception mode, connection of answering
machine.
Normally receive fax only calls, an answering machine not conĆ
nected.
Receive voice and fax calls, an answering machine is connected.
(Not available in France.)
18
OP CALL TIMER
1. 20 sec *
2. 30 sec
3. 40 sec
4. 50 sec
Specifies time to make the beep after detecting a call when fax paĆ
rameter 15 is set to option 2. Used to specify time available to pick
up the phone for a voice call.
19
OGM LENGTH
__ __ (1 to 60 sec)
20 sec *
Specifies length of time allocated for Out Going Message as reĆ
corded on answering machine. OGM length should be set to match
the length of time of the recorded message on the answering maĆ
chine. during the message, the fax machine monitors the incoming
line for a fax tone.
20
SILENT DETECTION
1: Invalid
2: Valid *
Specifies reaction to undetected fax signal (effective when ParameĆ
ter 16 set to option 2).
Set if answering machine uses one tape for both incoming and outĆ
going messages.
Detects fax calls even if fax signal is not sent.
22
SUBSTITUTE RCV
1: Invalid
2: Valid *
Specifies saving incoming call if unable to print.
Fax calls not answered if out of paper or ink.
Fax calls stored in memory if out of paper or ink.
23
REC. PAPER SIZE
1: A4
2: Letter *
3: Legal
Specifies size of paper in paper supply tray.
A4 (210 mm x 297 mm).
U.S. Letter (8 1/2 in. by 11 in.).
U.S. Legal (8 1/2 in. by 14 in.).
24
PRINT REDUCTION
1: Fixed
2: Auto *
Specifies reduction of incoming documents.
Reduced to percentage set in Parameter 25.
Reduced to fit in print area set in Parameter 23.
25
REDUCTION RATIO
70% Ć 100%
94% *
Specifies percentage of original size to which received document
or
copies are printed if Parameter 24 is set to option 1.
26
POLLING PASSĆ
WORD__ __ __
Specifies the 4Ćdigit password shared with polled station to appear
in display.
32
COPY REDUCTION
1. Invalid *
2. Valid
Specifies copy reduction mode to be ON or OFF.
Copy reduction mode disabled.
Copy reduction mode enabled.
35
DAYLIGHT TIME
1. Invalid
2. Valid *
Specifies ability to automatically set machine time according to
Daylight Saving Time system.
Function is disabled.
Function is enabled.