HP FAX-700 - Manual (Page 191)

Problem Resolution 5Ć16
Table 5-1. Information Codes on the HP FAX-700 and FAX-750 (Continued)
Info
Code
Mode Description of the Problem Action
558 Tx
ECM
FCS error while in the subroutine to reĆ
ceive an RR response
Retry fax send
559 Tx
ECM
Carrier did not go away for T6" time after
reception of RCP while in the subroutine
to receive an RR response
Retry fax send
560 Tx
ECM
No response from remote party to the
EOR.O signal
Retry fax send
561 Not used
562 Not used
563 Not used
564 Tx
ECM
Received DCN command while in the subĆ
routine to receive a response following
EOR NULL/MPS/EOP/EOM transmission
Retry fax send
565 Tx
ECM
Frame error due to T6" timeout while in
the subroutine to receive a response folĆ
lowing EOR NULL/MPS/EOP/EOM transĆ
mission
Retry fax send
566 Tx
ECM
FSC error while in the subroutine to reĆ
ceive a response following EOR NULL/
MPS/EOP/EOM transmission
Retry fax send
567 Tx
ECM
Carrier did not go away for T6" time after
reception of RCP while in the subroutine
to receive a response following EOR
NULL/MPS/EOP/EOM transmission
Retry fax send
571 Rx
ECM
Received command was other than PRIĆQ,
CTC, PPS.PRIĆQ, PPS.Q, or EOR.Q
Check for fax completeness. Contact the
sending station. Retry fax reception
572 Rx
ECM
Called operator due to the PRIĆQ comĆ
mand from remote party, but the operator
didn't go offĆhook within the T3" time
period
Not an error. No action required
573 Rx
ECM
No response from the remote party within
T2" time after the RNR signal was sent in
answer to the remote party's PPS PRIĆQ,
PPS Q signals
Check for fax completeness. Contact the
sending station. Retry fax reception
574 Rx
ECM
Received signal other than RR/PPSĆQ
from the remote party after the RNR signal
was sent to the remote party's PPS PRIĆQ,
PPS Q signals
Check for fax completeness. Contact the
sending station. Retry fax reception
575 Rx
ECM
No response from the remote party within
T2" time after the RNR signal was sent in
answer to the remote party's EOP PRIĆQ,
EOP Q signals
Check for fax completeness. Contact the
sending station. Retry fax reception
576 Rx
ECM
Received signal other than RR/PPSĆQ
from the remote party after the RNR signal
was sent in answer to the remote party's
EOP PRIĆQ, EOP Q signals
Check for fax completeness. Contact the
sending station. Retry fax reception