HP FAX-700 - Manual (Page 89)

Operation and Usage 3Ć17
Figure 3Ć6. Loading a Document into the HP FAXĆ700
EK_12
Slide the document OUT tray forward until it stops. The tray will catch the pages of the document as they exit the
machine after transmission.
Figure 3Ć7. Sliding the Document OUT Tray Forward
EK_7
Document OUT Tray
Adjust the ADF document guides to center the document in the ADF. See step 2 of Figure 3-6.
After loading the document, use one of the dialing methods described in this chapter to dial the telephone number of
the receiving station where the document is to be sent.
Loading a Document into the HP FAX-900 and FAX-950
To load a document into the fax machine for transmission, load your document printed side facing down into the
automatic document feeder. The automatic document feeder will hold up to twenty pages (30 pages if 20 lb or less
paper weight is used). If more than twenty pages are to be sent, place additional pages on top of last page as the docu-
ment pages are fed through the machine. Make sure the document is free of paper clips and staples and is not torn.
Load the document and adjust the top cover document guides to fit the document. The HP FAX-900 is illustrated after
the next paragraph, but the location of the document guides and the document position do not differ for the FAX-950.
The fax machine will display that the document is set and generate a short beep sound, indicating that the document is
properly set into the automatic document feed mechanism.