HP FAX-700 - Manual (Page 101)

Operation and Usage 3Ć29
Use the numeric keypad to dial the phone number. To correct an error in entering the number, use an arrow button to
move to the incorrect number and reenter it.
When a busy or unanswered line is sensed, your fax machine automatically redials the number up to a maximum of 15
times. The maximum number is established by setting (parameter) 17. The fax machine will redial five times at one-
minute intervals and then once every 15 minutes until the maximum is reached. Settings (parameters) are covered in
chapter 4 of this guide.
To start another sequence of automatic dialing, press the Redial/Pause button.
Direct Dialing on the HP FAX-900 and FAX-950
To use on-hook direct dialing, press the buttons in the sequence shown and enter the necessary information where
requested. (Load the document face down.)
→ Enter phone number
Dial/Space
→
Load Document
Use the numeric keypad to enter the phone number. To correct an error in entering the number, press Stop and
reenter the number.
When a busy or unanswered line is sensed, your fax machine automatically redials the number up to five times, at
three-minute intervals.
To start another sequence of automatic dialing, press the Redial/Pause button.
To use off-hook direct dialing, press the button in the sequence shown and enter the necessary information where
requested. (Load the document face down.)
Load Document
→
Enter
phone
number
→ →
Notify receiving station
to prepare to receive a
fax transmission
→
→ Wait to hear
beep sound →
Start
→
Use the numeric keypad to enter the phone number. To correct an error in entering the number, press Stop and
reenter the number.
When a busy or unanswered line is sensed, your fax machine automatically redials the number up to five times, at
three-minute intervals.
To start another sequence of automatic dialing, press the Redial/Pause button.