HP FAX-700 - Manual (Page 151)

Optimization 4Ć17
To use confidential communication, refer to the following procedures.
To Set Up for Confidential Network Communications
on the HP FAX-950
Fax parameter 42 must be set to option 2 (valid) in order to use confidential network communications.
To set up for confidential network communication, press the buttons in the sequence shown.
Menu
→
Set
→
→
4
→
7
→
2
→
4
→
Set
→
2
→
Set
→
Stop
To Set Your Number and Network Password for Confidential Network
Communications on the HP FAX-950
When using confidential network communications, you need to set your fax station telephone number and network
password.
To set telephone number and password for confidential network communications, press the buttons in the
sequence shown and enter the necessary information where requested.
Menu
→
Set
→
→
7
→
Set
→
Set
→
Stop
5
→ Enter phone
number
Set
→
Enter 4–digit
password
→
→
To Send Confidential Communications on the HP FAX-950
Note
Be sure to use the shared confidential code established between your sending station and the
receiving station.
To send a confidential communication, load the document and press the buttons in the sequence shown.
Menu
→
Set
→
→
Set
→
Enter 4-digit code
→
1 5
→ → →
Enter telephone number
Start