beautypg.com

Make a borderless copy of a photo, Crop an original, Stop copying – HP 2570 User Manual

Page 78: Crop an original stop copying

background image

Make a borderless copy of a photo

You can make borderless copies on both large and small photo papers. For the best
quality when copying a photo, load photo paper in the paper tray and change your
copy settings for the correct paper type and photo enhancement.
1.

Load photo paper in the paper tray.
You can load up to 10 x 15 cm (4 x 6 inch) photo paper (without tabs) into the
photo tray. Larger size photo paper, however, must be loaded in the main tray.

2.

Load your original photo print side down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.

3.

Press

Copy Menu

to display the

Copy Menu

.

4.

Press to highlight

Reduce/Enlarge

, then press

OK

.

5.

Press to highlight

Fill Entire Page

, then press

OK

.

6.

Press

Start Copy Black

or

Start Copy Color

.

The HP All-in-One makes a borderless copy of your original photo, as shown
below.

Tip

If the output is not borderless, then set the paper size to the

appropriate borderless paper size, set the paper type to

Photo Paper

,

and then try again.
For more information on changing copy settings, see

Change the copy

settings

.

Crop an original

Before copying an original, you might want select an area to copy using the

Crop

setting from the

Copy Menu

. Selecting the

Crop

setting initiates a scan and displays

a preview of the original on the color graphics display.
Cropping changes the dimensions of the image, thus decreasing its physical size.

Tip

You can resize the cropped image by changing the

Reduce/Enlarge

setting. Use

Fill Entire Page

to make a borderless copy of the cropped image.

Use

Fit to Page

to make a copy with borders. Enlarging a cropped image

might affect print quality depending on the resolution of the image.

To crop an image from the control panel
1.

Press

Copy

to display the

Copy Menu

.

2.

Press until

Crop

is highlighted, then press

OK

.

3.

Use the arrow keys to set the position of the upper-left corner of the crop area.

4.

Press

OK

.

5.

Use the arrow keys to set the position of the lower-right corner of the crop area.

6.

Press

OK

.

The cropped image is displayed on the color graphics display.

Stop copying

➔ To stop copying, press

Cancel

on the control panel.

User Guide

75

Copy

This manual is related to the following products: