Finish setting up your hp all-in-one, Set your language and country/region, Connection information – HP 2570 User Manual
Page 26: Connection, Information, Finish setting up your hp all-in- one
3
Finish setting up your HP All-in-
One
After you have completed the steps in your Setup Guide, refer to this chapter to help
you finish setting up your HP All-in-One. This chapter describes how to set up your
language and country/region preferences, and it explains the different ways you can
connect your HP All-in-One.
In addition to the setup instructions in this User Guide, you can also set up HP Instant
Share on your network-connected HP All-in-One, so you can easily share images with
friends and relatives. If you installed the
HP Image Zone
software, press the
HP Instant Share
button on the control panel of your network-connected HP All-in-
One to launch the setup wizard on a connected computer. For more information on
setting up HP Instant Share, see the
2570 series Help
section in the onscreen
HP Image Zone Help
.
●
Change the device language and country/region. For more information, see
your language and country/region
.
●
Explore the connection options for your HP All-in-One, including USB, wired
networking, Bluetooth, and printer sharing. For more information, see
Set your language and country/region
The language and country/region setting determines which language the HP All-in-
One uses to display messages on the color graphics display. Usually, you set the
language and country/region when you first set up the HP All-in-One. However, you
can change the setting at any time by using the following procedure.
1.
Press
Setup
.
2.
Press until
Preferences
is highlighted, press
OK
, then press
OK
again.
This displays the
Preferences
menu, and then selects
Set Language & Country/
Region
.
A list of languages appears. Press or to scroll through the list of languages.
3.
When your language is highlighted, press
OK
.
4.
When prompted, press
OK
for
Yes
or press until
No
is highlighted, then press
OK
.
The countries/regions for the selected language appear. Press or to scroll
through the list.
5.
When the country/region you want to select is highlighted, press
OK
.
6.
When prompted, press
OK
for
Yes
, or press until
No
is highlighted, then press
OK
.
Connection information
Your HP All-in-One comes equipped with a USB port so you can connect directly to a
computer using a USB cable. You can also connect your HP All-in-One to a wired
network. If you insert an HP bt300 or HP bt400 series Bluetooth
®
Wireless Printer
User Guide
23
Finish
setup