HP 2570 - Manual (Page 27)

Adapter into the front USB port, Bluetooth ® devices such as PDAs and camera
phones can print to your HP All-in-One.
Supported connection types
Description Recommended
number of
connected
computers for best
performance Supported software
features Setup instructions
USB connection One computer
connected with a
USB cable to the
USB port on the back
of the HP All-in-One. All features are
supported. Follow the Setup
Guide for detailed
instructions.
Ethernet (wired)
connection Up to five computers
connected to an
HP All-in-One using a
hub or router. All features are
supported. Follow the Setup
Guide and
Connect
to a network in this
User Guide for
detailed instructions.
HP bt300 or HP
bt400 series
Bluetooth
® Wireless
Printer Adapter (HP
Bluetooth
® adapter)
One Bluetooth ®
device or computer.
Printing from a
Bluetooth
® device
such as a PDA or
camera phone, or a
Bluetooth
® -enabled
computer.
For information on
printing from a device
such as a PDA or
camera, see the
onscreen
HP Image
Zone Help .
For information on
printing from a
Bluetooth
® -enabled
computer, see
Connect using
Bluetooth®
.
Printer sharing Up to five computers.
The host computer
must be turned on at
all times, or the other
computers will not be
able to print to the
HP All-in-One. All features resident
on the host computer
are supported. Only
print is supported
from the other
computers. For setup
instructions, see
Use
printer sharing
(Windows)
or Use
printer sharing (Mac) .
Connect using a USB cable
The Setup Guide that came with your device provides detailed instructions for using a
USB cable to connect a computer to the rear USB port.
Chapter 3
24 HP Photosmart 2570 All-in-One series
Finish
setup