HP 2570 - Manual (Page 46)

5 Load originals and load paper
This chapter provides instructions for loading originals on the glass to copy or scan,
choosing the best paper type for your job, loading paper in the paper tray, and tips for
avoiding paper jams.
Load an original
You can copy or scan up to letter- or A4-size originals by loading them on the glass,
as described here. You should also follow these instructions when loading a proof
sheet on the glass for photo printing.
Note Many of the special features will not work correctly if the glass and lid
backing are not clean. For more information, see Clean the HP All-in-One .
To load an original on the glass
1.
Lift the lid and place your original print side down on the right front corner of the
glass.
If you are loading a proof sheet, make sure the top of the proof sheet is lined up
against the right edge of the glass.
Tip For more help on loading an original, refer to the guides along the
front and right edges of the glass.
2. Close the lid.
Tip You can copy or scan oversized originals by completely removing the
lid from your HP All-in-One. To remove the lid, lift the lid to the open
position, grasp the sides of the lid, and then pull the lid upward. Your
HP All-in-One functions normally with the lid removed. Replace the lid by
inserting the hinges back into the appropriate slots.
User Guide 43
Load
originals
and paper