HP 2570 - Manual (Page 110)

For more information on setting up your HP All-in-One and connecting it to your
computer, see the Setup Guide that came with your HP All-in-One.
I received a message on the color graphics display about a paper jam or a
blocked carriage
Solution If either a paper jam or blocked carriage error message appears on
the color graphics display, there might be some packing material inside the
HP All-in-One. Lift open the print-carriage access door to expose the print
cartridges and remove any packing material (such as tape or cardboard) or any
other foreign objects blocking the carriage path.
Software installation troubleshooting
If you encounter a problem during software installation, see the topics below for a
possible solution. If you encounter a hardware problem during setup, see
Hardware
setup troubleshooting .
During a normal installation of the HP All-in-One software, the following events occur:
1.
The HP All-in-One software CD-ROM runs automatically.
2. The software installs.
3. Files are copied to your hard drive.
4. You are requested to connect the HP All-in-One to your computer.
5. A green OK and check mark appear on an installation wizard screen.
6. You are requested to restart your computer.
7. The registration process runs.
If any of these things did not occur, there might be a problem with the installation. To
check the installation on a Windows computer, verify the following:
To check the installation on a Windows computer, verify the following:
●
Start the HP Solution Center . If the HP Solution Center shows the essential
icons ( Scan Picture and Scan Document ), the software has been properly
installed. If the icons do not appear immediately, you might need to wait a few
minutes for the HP All-in-One to connect to your computer. Otherwise, see
Some
of the buttons are missing in the HP Solution Center (Windows) .
For information on starting the HP Solution Center , see the onscreen HP Image
Zone Help that came with your software.
● Open the Printers dialog box and check to see that the HP All-in-One is listed.
● Look in the system tray at the far right of the Windows taskbar for an HP All-in-
One icon. This indicates that the HP All-in-One is ready.
When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
Solution If the installation does not run automatically, you can start it manually:
User Guide 107
Troubleshooting