HP 2570 - Manual (Page 17)

To open the HP Image Zone software on a Windows computer
1. Do one of the following:
–
On the Windows desktop, double-click the HP Solution Center icon.
– In the system tray at the far right of the Windows taskbar, double-click the
HP Digital Imaging Monitor icon.
– On the taskbar, click Start , point to Programs or All Programs , select HP ,
and then click HP Solution Center .
2. If you have more than one HP device installed, select the HP All-in-One tab.
Note On a Windows computer, the features available in the HP Solution
Center vary depending on the devices you have installed. The HP Solution
Center is customized to display icons associated with the selected device. If
the selected device is not equipped with a particular feature, then the icon for
that feature does not display in the
HP Solution Center .
Tip If the HP Solution Center on your computer does not contain any icons,
an error might have occurred during the software installation. To correct this,
use the Control Panel in Windows to completely uninstall the
HP Image Zone
software; then reinstall the software. For more information, see the Setup
Guide that came with your HP All-in-One.
To open the HP Image Zone software on a Mac (OS 9)
➔ Do one of the following:
– Double-click the HP Director alias on the desktop.
– Double-click the HP Director alias in the Applications:Hewlett-Packard:HP
Photo and Imaging Software folder.
The HP Director displays only the task buttons that pertain to the selected
device.
To open the HP Image Zone software on a Mac (OS 10.1 and later)
➔ Click the
HP Image Zone icon in the Dock, and then click the Devices tab and
choose a device.
The
HP Image Zone window appears.
Note On a Mac, the features available in the HP Image Zone software
vary depending on the chosen device.
Tip Once the HP Image Zone software is opened, you can access the
Dock menu shortcuts by selecting and holding the mouse button over the
HP Image Zone icon in the Dock.
Chapter 1
14 HP Photosmart 2570 All-in-One series
Overview