HP 2830 - Manual (Page 67)

Printing booklets
Note Printing booklets is not supported for Macintosh.
You can print booklets on letter, legal, or A4 print media.
To print booklets
1. Load the print media in the media input tray.
2. In the software program, open the device properties (printer driver).
3. On the Finishing tab, select Print on Both Sides.
Note If the Print on Both Sides option is dimmed or unavailable, open the device properties
(printer driver). For instructions, see
Software tips . On the Device Settings tab or the
Configure tab, select the option to allow manual duplexing, and then click OK. Repeat
steps 2 and 3.
Not all device features are available for all printer drivers or operating systems. See the
device properties (driver) online Help for information about the available features for the
driver.
4. Set the number of pages per sheet to two. Select the appropriate binding option, and
click OK.
5. Print the booklet.
6. After side one has been printed, remove the remaining paper from the input tray, and set
it aside until your booklet job is complete.
7. Gather the printed pages, turn the printed side down, and straighten the stack of paper.
ENWW Printing booklets 51