HP 2830 - Manual (Page 55)

Printing from the Macintosh OS
To print from the Macintosh OS
1. Make sure that paper is loaded in the printer.
2. On the File menu, click Page Setup.
3. Make sure that this printer is selected on the Format for pop-up menu.
4. Select the size of paper onto which you are printing.
5. Select the Orientation and Scale, if necessary, and click OK.
6. On the File menu, click Print.
7. Use one of the following methods to select the source (tray) from which you want to print
or select the type of media onto which you want to print. Always print by type for
special print media such as labels or transparencies.
● Mac OS 9.2.2: On the General pop-up menu, select the tray or type of media from
the Paper Source pop-up menu.
● Mac OS 10.2 or 10.3: On the Paper Feed pop-up menu, select the tray or type of
media.
8. Set any other settings that you want, such as watermarks.
9. By default, the printer prints to the top output bin, which is the best location for most print
jobs, including transparencies. For labels, heavy paper, or other jobs that require a
straight-through path, lower the rear output door on the printer.
10. Select the Print command to print the job.
ENWW Printing from the Macintosh OS 39