Receiving faxes to your computer – HP 2830 User Manual

Page 108

Text mode
Original mode

Receiving faxes to your computer

To receive faxes to your computer, you must turn on the receive-to-PC setting in the
software (see the device software Help). The receive-to-PC setting can be activated only
from one computer. If for any reason that computer is no longer available, you can use the
following procedure to turn the receive-to-PC setting off from the device control panel.

To turn off the receive-to-PC setting from the control panel

1. On the device control panel, press

ENU

2. Use the

or the

button to select Fax functions, and then press

NTER

3. Use the

or the

button to select Stop Recv to PC, and then press

NTER

to confirm

your selection.

After you select the Stop Recv to PC setting, any faxes that remain in the device
memory are printed.

Note

You cannot use the receive-to-PC feature if you are using Macintosh software, Windows 98,
Windows ME, or Windows NT.

Chapter 8 Fax

ENWW