HP 2830 - Manual (Page 226)

6. Place the imaging drum on a firm surface, and then pull the orange rings to remove the
shipping pins.
7. Remove the orange shipping lock on each end of the imaging drum, and remove the two
orange shipping spacers.
8. Remove the orange cover from the imaging drum.
CAUTION Do not touch the surface of the roller or expose the roller to light for an extended period of
time. Doing so could cause print-quality issues.
9. Align the arrows on the side of the imaging drum with the arrows inside the printer.
10. Lower the imaging drum into the printer, and then press it firmlyinto place.
11. Close the top cover and the scanner assembly.
210 Chapter 13 Managing supplies ENWW