beautypg.com

HP 2830 User Manual

Page 190

background image

4. Lifting the green lever, rotate the pick mechanism until it stays open.

5. Open the ADF lid and gently loosen the media by using both hands.

6. When the media is free, gently pull it out in the direction shown.

7. Close the lid to the flatbed scanner.

8. Lower the green lever.

9. Reinstall the cleanout part by inserting it as shown. Push down on the two tabs until the

part snaps into place. Install the cleanout part correctly, because future jamming might
occur if the cleanout part is not replaced correctly.

174

Chapter 11 How do I?

ENWW